Propagation Regularity of Air Shock Wave in Turning Roadway
Chunhui Song,
Xianglong Li,
Zihao Tao,
Xi Zhang,
Yingming Duan
Issue:
Volume 4, Issue 3, September 2019
Pages:
43-53
Received:
16 October 2019
Accepted:
23 November 2019
Published:
5 December 2019
Abstract: In order to study the propagation law of explosive shock wave in underground turning roadway, the peak overpressure value in the roadway with specific turning angle was compared and analyzed by combining field monitoring experiment with ANSYS numerical simulation. The results show that the blast wave propagates forward in a stable plane wave before turning. Before the explosion air shock wave propagates to the turn, it follows the propagation law in the straight through roadway. After turning, the diffraction and reflection through the wall of the roadway will form a turbulence zone of 10-20m, and then continue to propagate forward in a stable plane wave. The turning roadway has a certain attenuation effect on the propagation of the shock wave. By analyzing the peak overpressure value before and after turning, the attenuation coefficient values of roadways at various turning angles are determined, That is, the attenuation coefficient values corresponding to the turning angles of 30°, 60°, 90°, 120° and 150° are 1.25, 1.31, 1.45, 1.50, 1.65, respectively, and the attenuation coefficient values are fitted with the roadway turning angle formula to obtain the quantitative calculation formula, which can provide reference for the safety of underground personnel, equipment and the design and production of mines.
Abstract: In order to study the propagation law of explosive shock wave in underground turning roadway, the peak overpressure value in the roadway with specific turning angle was compared and analyzed by combining field monitoring experiment with ANSYS numerical simulation. The results show that the blast wave propagates forward in a stable plane wave before...
Show More
